Pipe & Tube Fittings

Alloy 625 UNS N06625 Inconel Pipe Fittings
₹2,800.00
Alloy 625 Pipe Fittings Manufacturers & Suppliers – Inconel Alloy Buttweld Fittings, Alloy 625 Socket Weld Pipe Fittings, Alloy 625 Threaded Fittings
Usually alloy 625 pipe fittings can be used for high pressure applications at the temperature up to 980°C[1800°F] in oxidation service.
Melting Point of Alloy 625 Chemical Composition Alloy 625 Mechanical Properties Alloy 625
Physical Properties of Alloy 625 Equivalents of Alloy 625 Thermal Properties of Alloy 625
Metline is a leading manufacturer and supplier of Inconel alloy 625 pipe fittings, such as buttweld fittings (ASME B16.9, ASTM B366) or socket weld fittings (ANSI B16.11, ASTM B564), and threaded fittings (NPT, BSPT, BSP, ANSI B16.11, ASTM B564) in India and worldwide.
UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 fittings are widely used both for its high strength and outstanding aqueous corrosion resistance.
Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Production Range for Inconel 625 Fittings
Inconel Buttweld Pipe Fittings Size Range – 1/2″ NB to 48″ NB SCH 5 to SCH 160
Inconel Buttweld Pipe Fittings Products – Inconel 625 Elbow, Inconel 625 Tee, Inconel 625 Reducers, Inconel 625 End Caps, Inconel 625 Bends, Inconel Stub Ends
Manufacturing Specification for Inconel 625 Buttweld Pipe Fittings - ASME B16.9, ASTM B366
Inconel Socket Weld & Threaded Pipe Fittings Size Range – 1/2″ NB to 4″, with 1500 LBS, 3000 LBS and 6000 LBS Pressure Rating
Manufacturing Specification for Inconel Alloy 625 forged Socket Weld & Threaded Fittings - ANSI B16.11, ASTM B564
Inconel Socket Weld & Threaded Pipe Fitting Products – Elbows, Couplings, Street Elbows, Inserts, Caps, Tees, Unions and Crosses
"We Provide 100% Replacement Guarantee On Our All Our Special Alloy Products" We are professional manufacturer and supplier of nickel alloys and stainless steel products. Our customers can also buy from us, all special alloy pipe fittings, flanges and flexible hoses required along with pipes from us at best prices. "Our Quality Would Never be Compromised"For all your questions and enquiries please contact our sales department by dialing the following number: +919892451458/9833604219 or send an email to sales@metline.in
Details

Nickel Alloy Socket Weld Fittings - Inconel, Monel, Hastelloy, Incoloy Fittings Manufacturers

Alloy 625 UNS N06625 Inconel Socket Weld Fittings

₹2,500.00

Alloy 625 Socket Weld Fittings Manufacturers & Suppliers – Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert

Usually alloy 625 socket weld fittings can be used for high pressure applications at the temperature up to 980°C[1800°F] in oxidation service.

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy 625 socket weld fittings such as 90 Degree Elbow, 45 Degree Elbow, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet and Inserts in India and worldwide. We produce alloy 625 socket weld fittings in line with manufacturing specifications of ASTM B564 and dimensional specifications of ANSI B16.11.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 socket fittings are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Socket Weld Fittings

Pressure Class	3000LBS, 6000LBS, 9000LBS
Alloy 625 Threaded Forged Fittings Products	Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Street Elbow, Coupling, Half Coupling, Reducing Coupling, Cap, Hex Head Bushing, Hex Head Plug, Square Head Plug, Round Head Plug, Bull Plug, Boss, Outlet, Hex Nipple, Swage Nipple
Dimension Specifications	ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size	1/8"~4" (DN6~DN100)

"We Provide 100% Replacement Guarantee On Our All Our Special Alloy Products" We are professional manufacturer and supplier of nickel alloys and stainless steel products. Our customers can also buy from us, all special alloy pipe fittings, flanges and flexible hoses required along with pipes from us at best prices. "Our Quality Would Never be Compromised"For all your questions and enquiries please contact our sales department by dialing the following number: +919892451458/9833604219 or send an email to sales@metline.in

Details

Nickel Alloy Threaded Fittings Manufacturers, Suppliers, Factory - Nickel, Inconel, Hastelloy, Incoloy, Monel

Alloy 625 UNS N06625 Inconel Threaded Fittings

₹2,100.00

Alloy 625 Threaded Fittings Manufacturers & Suppliers – Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert

Usually alloy 625 threaded fittings can be used for high pressure applications at the temperature up to 980°C[1800°F] in oxidation service.

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a leading manufacturer and supplier of Inconel alloy 625 threaded fittings such as 90 Degree Elbow, 45 Degree Elbow, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet and Inserts in India and worldwide. We produce alloy 625 threaded fittings in line with manufacturing specifications of ASTM B564 and dimensional specifications of ANSI B16.11.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 threaded fittings are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Threaded Fittings

Pressure Class	3000LBS, 6000LBS, 9000LBS
Alloy 625 Threaded Forged Fittings Products	Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Street Elbow, Coupling, Half Coupling, Reducing Coupling, Cap, Hex Head Bushing, Hex Head Plug, Square Head Plug, Round Head Plug, Bull Plug, Boss, Outlet, Hex Nipple, Swage Nipple
Dimension Specifications	ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size	1/8"~4" (DN6~DN100)

Details

Alloy 625 UNS N06625 Inconel Tube Fittings
₹3,100.00
Alloy 625 Tube Fittings Manufacturers & Suppliers – Buy Top Quality Inconel Alloy 625 Tube Fittings – Compression Fittings, Ferrule Fittings
Usually alloy 625 tube fittings made from bar stock can be used for high pressure applications at the temperature up to 980°C[1800°F] in oxidation service.
Melting Point Chemical Composition Mechanical Properties
Physical Properties Equivalents Thermal Properties
Metline is a leading manufacturer and supplier of Inconel alloy 625 tube fittings, also widely known as compression or instrumentation fittings in India and worldwide.
UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 seamless tubing are widely used both for its high strength and outstanding aqueous corrosion resistance.
Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Production Range for Inconel 625 Tube Fittings
Type : Forged ASTM B564, ASTM B446, Fittings Made from Bar Stock
Standards : ASTM, ASME and API
Types: Alloy 825 Compression Fittings, Alloy 825 Double Ferrule Fittings, Inconel Instrumentation Fittings
Sizes range from 1/16″ to 2″ and 2 mm to 50.8 mm
Double Ferrule Design, Suitable for High Pressure Applications
Every Fitting is Stamped with Size, Material, and Heat Number
Compression Tube Fittings – Male Connector, Male Pipe Weld Connector, Bulkhead Male Connector, Male Elbow, Male Adapter, Male Run Tee, Male Branch Tee, Female Connector, Female Adapter, Bulkhead Female Connector, Female Elbow, Female Branch Tee, Female Run Tee, Ferrule Union, Ferrule Bulkhead Union, Ferrule Union Tee, Union Cross, Reducing Union, Elbow Union, Ferrule Reducer, Bulk Head Reducer, Tube Cap, Tube Plug, Ferrule Nut, Front & Back Ferrule
Fittings we Manufacture in Inconel Alloy 625 - Flanges, Slip-Ons, Blinds, Weld-Necks, Lapjoints, Long Welding Necks, Socket Welds, Elbows, Tees, Stub-ends, Returns, Caps, Crosses, Reducers, and Pipe Nipples
"We Provide 100% Replacement Guarantee On Our All Our Special Alloy Products" We are professional manufacturer and supplier of nickel alloys and stainless steel products. Our customers can also buy from us, all special alloy pipe fittings, flanges and flexible hoses required along with pipes from us at best prices. "Our Quality Would Never be Compromised"For all your questions and enquiries please contact our sales department by dialing the following number: +919892451458/9833604219 or send an email to sales@metline.in
Details

Inconel Alloy 600/625 Boiler Pipes & Tubes

₹4,400.00

Inconel Alloy 600/625 Boiler Pipes & Tubes Manufacturers in India - Top Quality Inconel Alloy 600/625 Boiler Pipes & Tubes, UNS N06600 Boiler Tubes, UNS N06625 Boiler Tubes

Metline Industries is a leading manufacturer and supplier of high quality Inconel Alloy 600/625 boiler pipes & tubes. Inconel Alloy 600/625 boiler tubes are produced in either cold rolled or hot rolled form, and pass through various quality checks. We specialize in the supply of Alloy seamless austenitic alloy-steel boiler, superheater and heat-exchanger tubes in size range of 3/8" OD to 3" with custom wall thickness. We are passionate about manufacturing pipe elbows, boiler with heads, fittings and custom fixtures made of steel, which meet the most stringent safety requirements.

Inconel Alloy 600/625 boiler pipes & tubes need to withstand high pressure and temperature. It has been made from low alloyed and heat resisting nickel and chromium. A boiler tube has been used in equipment’s which generate high temperature and pressure like boilers, steam super heater, pipelines of steams. Inconel Alloy 600/625 boiler tubes can be manufactured by both hot rolled and cold drawn process. We produce 100% tested seamless and welded Inconel Alloy 600/625 pipes and tubes for high pressure and temperature purposes.
We understand the criticality of the customer’s applications and all our activities starting from the raw-material through process are carried out with the focus on the customer’s end-use. Though we follow specification, our endeavor is always to exceed the customer’s expectations.
We have attained huge prominence in manufacturing and supplying best quality Inconel Alloy 600/625 boiler pipes & tubes. Preferably used in boilers, these tubes have high thermal stability and sturdiness. Our offered tubes are manufactured with the use of supreme quality Inconel Alloy 600/625 raw materials and modernistic technology as per current industrial norms.
We are a leading stockiest and supplier for the welded and seamless Inconel Alloy 600/625 boiler tubes as per ASTM, DIN and ASME standards. Our Offered range of Inconel Alloy boiler tubes are manufactured by our professional team at our manufacturing units using advanced machinery such as heat treatment furnaces, draw benches and u-bending facilities. We can offer 100% Hydrostatic Test or 100% Eddy Current Test for all the Inconel Alloy boiler tubes supplied by us. All tubes are accompanied with certifications as per EN 10204 3.1.

Production & Supply Range for Inconel Alloy 600/625 Boiler Pipes & Tubes

Item	Inconel Alloy 600/625 Boiler Pipes & Tubes
Specifcation	ASTM B444, ASTM B705, ASTM B704
Size	3/8" OD to 3" OD (Imperial and Metric sizes)
Thickness	0.7 mm- 13 mm
Length	3 MTRS, 6 MTRS, Custom Length
Test Certifcate	EN 10204 3.1

Details

Inconel Alloy 600/625 Condenser Pipes & Tubes

₹4,100.00

Inconel Alloy 600/625 Condenser Pipes & Tubes Manufacturers in India. Inconel Alloy 600/625 Condenser Tube Suppliers, UNS N06600 Condensers Tubes, UNS N06625 Condenser Tubes

Metline Industries is a professional manufacturer, distributors and supplier of high quality Inconel Alloy 600/625 condenser tubes, with annual sales of over 2000 tons. Inconel Alloy 600/625 are high-performance qualities and resistance to corrosion and oxidation. It performs well in both low and high temperature applications where other materials such as steel and aluminum would fail, and is also resistance to pitting, corrosion cracking and crevice. Metline manufactures high temperature cooling tubes for condensers and heat exchangers to various industries.

Inconel Alloy 600/625 condenser pipes & tubes are supplied with Plain end, Bevel end, Square cut under request, and deburring. Inconel Alloy 600/625 condenser tubes are commonly manufactured with an O.D. of 5/8", 3/4", and 1". Some applications, particularly ammonia chillers, use larger O.D. tubes than these. Inconel alloy 600/625 condenser tubes can also be internally and externally enhanced to further increase their efficiency.
We are recognized as a leading supplier of Inconel Alloy 600/625 condenser and boiler tubing and pipe, meeting the needs of fabricators and producers for straight length, finned, and U-bend materials. Inconel Alloy 600/625 condenser tubes are specifically designed to efficiently condense process fluid off of the outside of the tube. We use our resources and experience to offer our customers an extensive array of alloys and products, provide the quality each customer expects at the lowest possible cost and deliver it on time. We work together with our customers to develop lower cost options.
We are a leading stockiest and supplier for the welded Inconel Alloy 600/625 condenser tubes as per ASTM, DIN and ASME standards. Metline Industries specialized in heat exchanger/condensers tubing, which are manufactured using superior grade of steel. We can offer 100% Hydrostatic Test or 100% Eddy Current Test for all the condenser tubes supplied by us. All tubes are accompanied with certifications as per EN 10204 3.1.

Production & Supply Range for Inconel Alloy 600/625 Condenser Pipes & Tubes

Item	Inconel Alloy 600/625 Condenser Pipes & Tubes
Specifcation	ASTM B444, ASTM B705, ASTM B704
Size	3/8" OD to 3" OD (Imperial and Metric sizes)
Thickness	1 mm- 13 mm
Length	3 MTRS, Custom Length
Test Certifcate	EN 10204 3.1

Details

Inconel Alloy 600/625 Heat Exchanger Tubes

₹4,100.00

Inconel Alloy Seamless Steel Tube for Heat-Exchangers, Alloy 600 Inconel Alloy Heat Exchanger Tube Manufacturers, UNS N06600 Heat Exchanger Tubes, UNS N06625 Heat Exchanger Tubes

Metline is one of the leading manufacturers and suppliers of inconel alloy heat exchanger tubes (seamless and welded) for all types of heat exchangers: coolers, condensers, evaporators, preheaters, reheaters, reboilers, steam generators and air coolers. Heat exchanger tubes are used to manufacture heat exchangers that can transfer heat from one fluid/medium to another fluid/medium. We supply our heat exchanger tubes to a wide range of industries, including the energy, oil and gas, power generation, pharmaceutical and chemical sectors. Heat Exchanger Tube including straight tube, U-bend tube, finned tube, etc. Heat exchanger tube is one element of the heat exchanger placed within the cylinder for heat exchange between the two media.

One of the largest manufacturers and exporters of Inconel 600 & 625 alloy seamless tubes for heat exchangers in India. We specialize in the supply of Alloy 600 and 625 seamless austenitic alloy-steel boiler, superheater and heat-exchanger tubes in size range of 1/2" OD to 3" with custom wall thickness. All inventory can be cut to your exact size requirements, and is available for ship worldwide from a number of locations.
Inconel heat exchanger tubes are produced in either cold rolled or hot rolled form, and pass through various quality checks. We produce Inconel alloy heat exchanger tubes as per ASTM/ASME standards such as ASTM B444, ASTM B704, and ASTM B705. We can offer 100% Hydrostatic Test or 100% Eddy Current Test for all the heat exchanger tubes supplied by us.
Inconel alloy heat exchanger tubes are supplied with Plain end, Bevel end, Square cut under request, and deburring. All tubes are accompanied with certifications as per EN 10204 3.1.

Production & Supply Range for Inconel Alloy 600 & 625 Heat Exchanger Tubes

Item	Inconel Alloy 600 & 625 Heat Exchanger Tubes
Specification	ASTM B444, ASTM B705, ASTM B704
Size	3/8" OD to 3" OD (Imperial and Metric sizes)
Thickness	0.7mm to 4mm
Length	3 MTRS, Custom Length
Test Certificate	EN 10204 3.1

Details

Nickel Alloy Elbow Manufacturers, Suppliers, Factory - Inconel, Monel, Hastelloy, Incoloy

Inconel Alloy 625 Elbows/Bends ASTM B366

₹8,500.00

Inconel 625 Elbow & Bends Manufacturers & Suppliers – Buy Long & Short Radius Alloy 625 Elbows, Custom Radius Inconel 625 Pipe Bends, Available at Best Prices!

Manufacturing Specification: ASTM B366 Factory-Made Wrought Nickel and Nickel Alloy FittingsUsually alloy 625 elbows and pipe bends can be used for high pressure applications at the temperature up to 980°C[1800°F] in oxidation service.

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy elbows and bends in a wide range of sizes. We can produce large diameter 100% X Raw Welded elbows in custom thickness. We produce alloy 625 elbows in line with manufacturing specifications of ASTM B366 and dimensional specifications of ASME B16.9.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 bends are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Elbow & Pipe Bends

Seamless Elbow	1/2″-6″ DN15-DN150
Welded Elbow	6″-72″, DN150-DN1800
Wall Thickness	SCH 5, SCH 10, SCH 20, SCH 30, STD, SCH 40, SCH 60, SCH XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS, SCH 5S, SCH 20S, SCH 40S, SCH 80S
Maximum Thickness	120mm
Wall Thickness	2mm – 120mm
Bending Radius	R=1D – 10D
Product Angle	0 – 180 Degree

Details

Nickel End Caps Manufacturers, Suppliers, Factory - Inconel Monel Hastelloy Incoloy

Inconel Alloy 625 End Caps/Dish Ends – ASME B16.9, ASTM B366

₹7,500.00

Inconel 625 End Caps & Dish End Manufacturers – ASME B16.9, ASTM B366, Custom Drawing Dish End Suppliers

Raw Materials, ASTM B443 - Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate, Sheet, and Strip
Manufacturing Specification for End Caps & Dish Ends - ASTM B366 Factory-Made Wrought Nickel and Nickel Alloy Fittings

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy 625 end caps and alloy 625 dish ends in a wide range of sizes and pressure ratings. We can produce large diameter Alloy 625 dish ends in standard dimensions and custom drawings. We produce alloy 625 end caps and dish ends in line with manufacturing specifications of ASTM B366 and dimensional specifications of ASME B16.9 as well as custom drawings.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 end caps are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 End Caps & Dish Ends

Seamless End Caps	1/2″-24″ DN15-DN600
Dish End Type End Caps	Custom Sizes upto 3000mm (Higher Sizes Fabricated by Welding Plates)
Wall Thickness	SCH 5, SCH 10, SCH 20, SCH 30, STD, SCH 40, SCH 60, SCH XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS, SCH 5S, SCH 20S, SCH 40S, SCH 80S
Maximum Thickness	120
Wall Thickness	2mm – 120mm
Type of Dish Ends	Dome Shape (Half Ball), Ellipsoidal Head, Hemispherical Head, Torispherical Head
Certification	EN 10204 3.1 Certification, TPI Inspection before Delivery Accepted

Details

Nickel Alloy Flanges Manufacturers, Suppliers, Factory - Inconel Monel, Incoloy, Hastelloy

Inconel Alloy 625 Flanges – ASTM B 564, ANSI B16.5, EN/DIN

₹5,000.00

Inconel 625 Flanges Manufacturers – Buy ANSI B16.5 Inconel 625 Slip On Flanges, Weldneck Flanges, Lap Joint Flanges, Plate Flanges, & Blind Flanges

Raw Materials, ASTM B446 - Nickel-Chromium-Molybdenum-Columbium Alloy Rod/Bar
Finished Products as per ASTM B564 - Nickel Alloy Forgings

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy 625 flanges in a wide range of sizes and pressure ratings. We can produce large diameter Alloy 625 flanges in standard dimensions and custom drawings. We produce alloy 625 flanges in line with manufacturing specifications of ASTM B564 and dimensional specifications of ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 flanges are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Flanges

Sizes	from ½”NB to 48”NB
Standards	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings	Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 \| PN6, PN10, PN16, PN25, PN40, PN64 etc.
Types of Flanges	Inconel 625 Weld Neck Flanges (WNRF), Inconel 625 Slip-on Flanges (SORF), Inconel 625 Blind Flanges (BLRF), Inconel 625 Lap Joint Flanges (SOLJ), Inconel 625 Socket-weld Flanges (SWRF), Inconel 625 Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, etc.
Flange Face Type	Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added Services	CNC Machining, Customised Flanges
Certification	EN 10204 3.1 Certification, TPI Inspection before Delivery Accepted

Details

Nickel Alloy Stub Ends - Inconel, Monel, Hastelloy, Incoloy Tubes Manufacturers, Suppliers, Factory

Inconel Alloy 625 Lap Joint Stub Ends – ASME B16.9, MS SP 43

₹9,500.00

Inconel 625 Lap Joint Stub Ends Manufacturers – Buy ASME B16.9, MS SP 43 Type A/B Stub Ends!

Manufacturing Specification: ASTM B366 Factory-Made Wrought Nickel and Nickel Alloy Fittings

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy stub ends in a wide range of sizes. We can produce large diameter 100% X Raw Welded Alloy 625 eccentric and concentric reducer in standard and custom thickness. We produce alloy 625 stub ends in line with manufacturing specifications of ASTM B366 and dimensional specifications of ASME B16.9 & MS SP 43 Type A & B (Long & Short Pattern)

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 stub ends are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Stub Ends

Seamless Elbow

1/2″-6″ DN15-DN150

Welded Elbow

6″-72″, DN150-DN1800

Wall Thickness

SCH 5, SCH 10, SCH 20, SCH 30, STD, SCH 40, SCH 60, SCH XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS, SCH 5S, SCH 20S, SCH 40S, SCH 80S

Maximum Thickness

120mm

Wall Thickness

2mm – 120mm

Type of Stub Ends

Long/Short Lap Joint Stub Ends, Large Diameter 100% RT Passed, 100% X-Ray Welded Inconel Stub Ends

Manufacturing Process

Hot Extruded, Forged, 2 Half Fabricated, 100% X Ray Welded, Cold Worked

Details

Nickel Alloy Reducer Manufacturers, Suppliers, Factory - Inconel Monel Hastelloy Incoloy

Inconel Alloy 625 Reducer ASTM B366 – Eccentric, Concentric Reducers

₹8,500.00

Inconel 625 Eccentric & Concentric Reducer Manufacturers & – Buy ASTM B366 Alloy 625 Reducer!

Manufacturing Specification: ASTM B366 Factory-Made Wrought Nickel and Nickel Alloy FittingsUsually alloy 625 buttwelded reducer can be used for various pressure applications at the temperature up to 980°C[1800°F] in oxidation service.

Melting Point	Chemical Composition	Mechanical Properties
Physical Properties	Equivalents	Thermal Properties

Metline is a manufacturer and supplier of Inconel alloy reducer's in a wide range of sizes. We can produce large diameter 100% X Raw Welded Alloy 625 eccentric and concentric reducer in standard and custom thickness. We produce alloy 625 reducer in line with manufacturing specifications of ASTM B366 and dimensional specifications of ASME B16.9.

UNS N06625 or W.Nr. 2.4856, Inconel 625, also known as Alloy 625, is a nickel-chromium-molybdenum alloy with an addition of niobium. Niobium acts with the molybdenum to stiffen the alloy’s matrix and thereby providing high strength without a strengthening heat treatment. Alloy 625 reducer's are widely used both for its high strength and outstanding aqueous corrosion resistance.Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability, and resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Production Range for Inconel Alloy 625 Reducer

Seamless Elbow	1/2″-6″ DN15-DN150
Welded Elbow	6″-72″, DN150-DN1800
Wall Thickness	SCH 5, SCH 10, SCH 20, SCH 30, STD, SCH 40, SCH 60, SCH XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS, SCH 5S, SCH 20S, SCH 40S, SCH 80S
Maximum Thickness	120mm
Wall Thickness	2mm – 120mm
Type of Reducer	Alloy 625 Eccentric Reducer, Alloy 625 Concentric Reducer
Manufacturing Process	Hot Extruded, Forged, 2 Half Fabricated, 100% X Ray Welded

Details

Alloy 625 Pipe Fittings Manufacturers & Suppliers – Inconel Alloy Buttweld Fittings, Alloy 625 Socket Weld Pipe Fittings, Alloy 625 Threaded Fittings

Metline is a leading manufacturer and supplier of Inconel alloy 625 pipe fittings, such as buttweld fittings (ASME B16.9, ASTM B366) or socket weld fittings (ANSI B16.11, ASTM B564), and threaded fittings (NPT, BSPT, BSP, ANSI B16.11, ASTM B564) in India and worldwide.

Production Range for Inconel 625 Fittings

Alloy 625 Socket Weld Fittings Manufacturers & Suppliers – Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert

Production Range for Inconel Alloy 625 Socket Weld Fittings

Alloy 625 Threaded Fittings Manufacturers & Suppliers – Elbow 90 Degree, Elbow 45 Degree, Tee, Cross, Union, Coupling, Half Coupling, Cap, Boss, Outlet, Welding Outlet, Insert

Production Range for Inconel Alloy 625 Threaded Fittings

Alloy 625 Tube Fittings Manufacturers & Suppliers – Buy Top Quality Inconel Alloy 625 Tube Fittings – Compression Fittings, Ferrule Fittings

Metline is a leading manufacturer and supplier of Inconel alloy 625 tube fittings, also widely known as compression or instrumentation fittings in India and worldwide.

Production Range for Inconel 625 Tube Fittings

Inconel Alloy 600/625 Boiler Pipes & Tubes Manufacturers in India - Top Quality Inconel Alloy 600/625 Boiler Pipes & Tubes, UNS N06600 Boiler Tubes, UNS N06625 Boiler Tubes

Production & Supply Range for Inconel Alloy 600/625 Boiler Pipes & Tubes

Inconel Alloy 600/625 Condenser Pipes & Tubes Manufacturers in India. Inconel Alloy 600/625 Condenser Tube Suppliers, UNS N06600 Condensers Tubes, UNS N06625 Condenser Tubes

Production & Supply Range for Inconel Alloy 600/625 Condenser Pipes & Tubes

Inconel Alloy Seamless Steel Tube for Heat-Exchangers, Alloy 600 Inconel Alloy Heat Exchanger Tube Manufacturers, UNS N06600 Heat Exchanger Tubes, UNS N06625 Heat Exchanger Tubes

Production & Supply Range for Inconel Alloy 600 & 625 Heat Exchanger Tubes

Inconel 625 Elbow & Bends Manufacturers & Suppliers – Buy Long & Short Radius Alloy 625 Elbows, Custom Radius Inconel 625 Pipe Bends, Available at Best Prices!

Production Range for Inconel Alloy 625 Elbow & Pipe Bends

Inconel 625 End Caps & Dish End Manufacturers – ASME B16.9, ASTM B366, Custom Drawing Dish End Suppliers

Production Range for Inconel Alloy 625 End Caps & Dish Ends

Inconel 625 Flanges Manufacturers – Buy ANSI B16.5 Inconel 625 Slip On Flanges, Weldneck Flanges, Lap Joint Flanges, Plate Flanges, & Blind Flanges

Production Range for Inconel Alloy 625 Flanges

Inconel 625 Lap Joint Stub Ends Manufacturers – Buy ASME B16.9, MS SP 43 Type A/B Stub Ends!

Production Range for Inconel Alloy 625 Stub Ends

Inconel 625 Eccentric & Concentric Reducer Manufacturers & – Buy ASTM B366 Alloy 625 Reducer!

Production Range for Inconel Alloy 625 Reducer